MCDC3F MICRO WET DUMMY CONNECTOR 3 Pins Underwater Dummy Plug Female

MCDC3F Micro Circular Dummy Connector — 3 Contacts

The MCDC3F is a 3-contact Micro Circular dummy connector in the female (sockets) configuration. It is not an electrical part: it seals and protects an unmated 3-contact Micro Circular connector against seawater ingress, biofouling, grit and mechanical damage during storage, transit and service intervals.

3 Contacts Dummy Connector Female Version 7,000 m Depth Chloroprene Body IP68

Key Design Features

• Keyed to the shell: the dummy carries the same keyway and thread as the working connector, so it cannot be fitted to the wrong contact count.
• Same seal as the connector: the nitrile O-ring compresses against the same sealing face, keeping the unmated contacts dry.
• Chloroprene body: the same rubber as the connector body, tolerant of deck handling, UV and the full operating temperature range.
• Protects the wet-mate life: keeping the per-contact seals compressed and the bores clean is what preserves the 500-cycle rating of the working connector.
• Correct pairing: the F version covers male connectors, the M version covers female connectors.

Technical Specifications

Materials

Ordering & Compatibility

Typical Applications

Protecting unmated 3-contact ports on lights, cameras and three-wire instrument feeds.

Notes for Selection

Fit the dummy whenever the cable is removed for transport, service or storage; leaving a face open invites biofouling and grit into the socket bores.