• 7DISCOS CABLE ASSEMBLY GA AND WIRING --1 MCIL10M (OM Type)-1 MCIL6F (OM TYPE) -4X MCIL3F
  • 7DISCOS CABLE ASSEMBLY GA AND WIRING --1 MCIL10M (OM Type)-1 MCIL6F (OM TYPE) -4X MCIL3F
  • 7DISCOS CABLE ASSEMBLY GA AND WIRING --1 MCIL10M (OM Type)-1 MCIL6F (OM TYPE) -4X MCIL3F
  • 7DISCOS CABLE ASSEMBLY GA AND WIRING --1 MCIL10M (OM Type)-1 MCIL6F (OM TYPE) -4X MCIL3F
  • 7DISCOS CABLE ASSEMBLY GA AND WIRING --1 MCIL10M (OM Type)-1 MCIL6F (OM TYPE) -4X MCIL3F
  • 7DISCOS CABLE ASSEMBLY GA AND WIRING --1 MCIL10M (OM Type)-1 MCIL6F (OM TYPE) -4X MCIL3F
  • 7DISCOS CABLE ASSEMBLY GA AND WIRING --1 MCIL10M (OM Type)-1 MCIL6F (OM TYPE) -4X MCIL3F
  • 7DISCOS CABLE ASSEMBLY GA AND WIRING --1 MCIL10M (OM Type)-1 MCIL6F (OM TYPE) -4X MCIL3F
  • 7DISCOS CABLE ASSEMBLY GA AND WIRING --1 MCIL10M (OM Type)-1 MCIL6F (OM TYPE) -4X MCIL3F
  • 7DISCOS CABLE ASSEMBLY GA AND WIRING --1 MCIL10M (OM Type)-1 MCIL6F (OM TYPE) -4X MCIL3F
  • 7DISCOS CABLE ASSEMBLY GA AND WIRING --1 MCIL10M (OM Type)-1 MCIL6F (OM TYPE) -4X MCIL3F
  • 7DISCOS CABLE ASSEMBLY GA AND WIRING --1 MCIL10M (OM Type)-1 MCIL6F (OM TYPE) -4X MCIL3F

7DISCOS CABLE ASSEMBLY GA AND WIRING --1 MCIL10M (OM Type)-1 MCIL6F (OM TYPE) -4X MCIL3F

7DISCOS custom subsea cable assembly with Micro Circular wet-mate connectors, 10 A per contact, 7,000 m depth, IP68, built to customer wiring schedule.
  • Description

  • PDF

  • Downloads

7DISCOS Subsea Cable Assembly — Built to Drawing

This is a made-to-order cable assembly rather than a catalogue connector: Built to the customer wiring schedule: 1 x MCIL10M (overmould type), 1 x MCIL6F (overmould type) and 4 x MCIL3F branches. Quote against your drawing. Each joint is terminated and moulded in-house, then pressure tested before dispatch.

Custom Assembly SubConn Compatible Micro Circular 10 A per Contact 7,000 m Depth IP68

Assembly Contents

PositionConnector
Trunk1 x MCIL10M, overmould type — 10 contacts, 10 A per contact, 50 A connector limit
Branch 11 x MCIL6F, overmould type — 6 contacts, 10 A per contact, 50 A connector limit
Branches 2-54 x MCIL3F — 3 contacts, 10 A per contact, 30 A connector limit

Connector Ratings

ParameterSpecification
Voltage rating600 V DC/AC rms
Current rating10 A per contact; connector limit 30 A (3-4 contacts) or 50 A (6-10 contacts)
Contact resistance< 0.01 Ω
Insulation resistance> 200 MΩ
Operating depth7,000 m (700 bar / 10,000 psi)
Design depth (mated)1,400 bar / 20,300 psi
Temperature (water)-4 °C to +60 °C
Temperature (air / storage)-40 °C to +60 °C
Wet mating cycles> 500
Ingress protectionIP68

Materials

ParameterSpecification
Connector bodyChloroprene rubber
ShellBrass / 316L stainless steel
ContactsGold-plated brass UNS-C36000
O-ringsNitrile rubber
Cable jacketPolyurethane or chloroprene, to drawing

Compatibility

ParameterSpecification
Connector seriesSubConn Compatible — Micro Circular MCBH / MCIL / MCOM
InterchangeabilityMates with SubConn, SeaCon and Burton micro circular connectors of the same contact count and opposite gender

How to Order

ParameterSpecification
Required with enquiryWiring schedule, cable type and OD, branch lengths, pin-out
OptionsShell material, locking sleeves, dummy connectors on unused branches
TestingInsulation resistance, continuity and hydrostatic test with certificate

Typical Applications

Seven-branch ROV or tooling harness, discos-style distribution cable, subsea camera and sensor networks.

Send your drawing Assemblies are quoted against your schematic. Provide the wiring schedule, cable specification, branch lengths and connector genders, and we will confirm lead time and test regime.